Arduino için Motor Paketi

Açıklama

Description 

When using the Arduino, there are many projects and things that you can do with it and one of them must includes driving a motor!
Today we bring you the Motor Pack for Arduino, which is a perfect kit for you to learn motor with Arduino. Whether your project requires a DC motor, a stepper motor, or a steering gear, all of them can be found in this kit!

This kit consists of

• DC motor x2
  Voltage: DC 6V
  Rated Speed:13000 rpm ±14%
  Motor Body Length: 38mm/1.46″
  Motor Body Diameter:20mm/0.79″
  Shaft Size:9.5/0.37″(L)
  Dupont cable:24AWG-100mm (Red/Black)
  Heat-shrinkable Tube: D1.5mm*10mm/0.06*0.39(Black)
• Small stepper motor x1
  Voltage: DC 5V
  Motor Body Length: 38mm/1.46″
  Motor Body Diameter:20mm/0.79″
  Shaft Size:9.5/0.37″(L)
  Reduction Ratio: 1:64
  Step Angle: 5.625/64
  Dupont cable:24AWG-100mm (5 wires)
• Standard servo x1
  Voltage: 4.8~6V
  Speed: 0.17/60°@4.8V； 0.14/60°@6.0V
  Torque: 3.5kg.cm@4.8V; 4.8kg.cm@6.0V
  Use Angle: ≤160°
  Size: 38.6*18.8*34.9mm/1.52*0.74*1.37″
• Micro servo x1
  Voltage: 4.8~6V
  Speed: 0.12/60°@4.8V； 0.10/60°@6.0V
  Torque: 1.5kg.cm@4.8V; 1.8kg.cm@6.0V
  Use Angle: ≤160°
  Size: 23*11.5*24mm/0.9*0.45*0.94″

  Control the servo via pulse-width modulation (PWM) wave(50Hz). The angle (counterclockwise) is proportional to the duty of Logic High.

• User Manual x1

Tip

Don’t forget to check this tutorial focusing on the 3 basic motors that you can drive with the Arduino which are the DC motor, Servo motor, and Stepper motor.

Tip

We also prepared Arduino Tutorial: How to drive a DC and Servo Motor to help you get started more easily.