Grove Base Cape for BeagleBone® v2.0

Açıklama

One of the best things about BeagleBone® Board is the massive accessible GPIOs coming out from its 2x 46 pin headers. However, as we know, all things has two sides – the good side and the bad side. 2×46 pins means 2×46 jumper wires, and 2×46 jumper wires putting on the board means – A REAL MESS. How can a rapid prototyping be called ‘rapid’ if you spend most of your time dealing with entangled wires? Now this Grove Base Cape for BeagleBone® v2.0 is designed for real rapid prototyping with your BeagleBone® board.

The cape has brought the simplicity of Grove system to your BeagleBone® projects, just attach it directly onto your BeagleBone® v2.0, and then you can have 12 easy-to-use Grove connectors to do plug-and-play with the big family of Grove modules. The connectors include 2x UART, 2x ADC, 4x Digital I/O and 4x I2C that interface to the pins on your BeagleBone® board, offering almost everything you need. There are two switches used to reset the I2C address in case of address conflicts. The board also integrates a switch for voltage transition – from a normal 5V to 3.3V.

Features

• 12 Grove Connectors includes

• 2x UART

• 2x Analog Input

• 4x Digital I/O

• 4x I2C Interface